Product ID:PR-1141 PC-62 DESERT BEIGE PART B
MSDS Date:07/25/1990
FSC:5610
NIIN:00N027740
MSDS Number: BMXMT

PRODUCTS RESEARCH & CHEMICAL CORPORATION

5430 SAN FERNANDO ROAD
GLENDALE, CA 91209
US

Emergency Phone: 800-424-9300 CHEMTREC/800-228-5635

Info Phone: 818-240-2060

Preparer: R.D.C

Cage: DO563

PRODUCTS RESEARCH & CHEMICAL

1800 GLENDALE, CA 91209 US

Telephone: 818-240-2060

Cage: DO563

ADD ADDTNL DECONTAM SOLN & KEEP LOOSELY COVERED

RTECS: 9999999ZZ

2-HEPTANONE; (METHYL N-AMYL KETONE)

CAS: 110-43-0

RTECS: MJ5075000

Fraction By Weight: 40%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM

POLYURETHANE PREPOLYMER CONTAINING INGREDIENT #3

CAS: 59330-00-6

Fraction By Weight: 30%

ISOCYANIC ACID, METHYLENEDI-4, 1-CYCLOHEXYLENE ESTER;

CAS: 5124-30-1

RTECS: NQ9250000

Fraction By Weight: 30%

OSHA PEL 0.01 PPM STEL, C

ACGIH TLV: 0.005 PPM

POLYURETHANE PREPOLYMER CONTAINING INGREDIENT # 5.

CAS: 55636-48-1

Fraction By Weight: 30%

ISOCYANIC ACID, METHYLENE

CAS: 4098-71-9

RTECS: NQ9370000

OSHA PEL S 0.005PPM/0.02STEL

ACGIH TLV: 0.005 PPM; 9394

0.005PPM; 0.02 PPM STEL, S.

RTECS: 9999999ZZ

APPROP COLLECTION SYSTEM TO COLLECT ANY

RTECS: 9999999ZZ

CONTACTING UNCURED RESIDUE ON EQUIPMENT AND AREA

RTECS: 9999999ZZ

WHICH WILL CAUSE CO*2 PRESSURE. DO NOT RESEAL

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: VAPORS WILL CAUSE IRRITATION
WITH WATERING EYES. LIQUID CONTACT WILL CAUSE IRRITATION & POSSIBLE
PERMANENT DAMAGE. SKIN: LOCAL SWELLING, SORENESS, ITCHING. IN
SENSITIZED INDIVIDUALS, EXPOSURE TO LIQUID OR VAPORS WILL RESULT
IN AN ALLERGIC SKIN RASH. INHAL: IRRIT OF NOSE, THROAT & EYES.
BRONCHIAL (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:IRRIT W/COUGH/TIGHT IN CHEST & POSS
DIFFICULTY IN BRTHG. MAY PRDCE ASTHMA-LIKE SYMP IN SENSITIZED
INDIVIDUALS. INDIVIDUALS SUFFERING FROM ASTHMA/OTHER CHRONIC RESP
CNDTNS MAY EXHIBIT A HEIGHT ENED SENSITIVITY TO ISOCYANATES &
SHOULD AVOID INHALATION EXPOSURE. INGEST: IRRIT OF DIGESTIVE TRACT
& STOMACH.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FLUSH WITH LUKE WARM WATER FOR AT LEAST 15 MIN. IF
SYMPTOMS PERSIST, CONSULT PHYS. SKIN: WASH WITH SOAP AND WATER. IF
SYMPTOMS PERSIST, CONSULT PHYS. INHAL: REMOVE TO FRESH AIR. IF
SYMPTOMS ARE PRESENT CONSULT PHYS. INGEST: CONSULT PHYS.

Flash Point Method:PMCC
Flash Point:102F,39C
Lower Limits:1.1% (ING 1)
Upper Limits:7.9% (ING 1)
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . USE WATER TO COOL HEAT EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:HIGH TEMPERATURES MAY CAUSE PRESSURE
BUILDUP IN CLOSED CONTAINERS.

Spill Release Procedures:REMOVE ALL IGNIT SOURCES. WEAR NIOSH/MSHA
APPRVD AIR-SUPPLIED RESP FOR MAJOR UNVENTED SPILL. COVER W/ABSORB
MATL, ADD DECONTAM SOLN & ALLOW TO REACT FOR 10 MIN.
DECONTAMINATING SOLN IS MADE UP OF 5% D ETERGENT, & 93% H*2O.
COLLECT IN CONTR,(ING 10)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:WHEN SPRAY APPLYING, USER MUST BE
FULLY PROTECTED FROM CONT W/ANY OF MATL. AN NIOSH/MSHA APPROVED
AIR-SUPPLIED RESPIRATOR MUST BE USED.
Other Precautions:FULL, PERMEATION RESISTANT, PROT SUIT INCL HEAD COVER
& FSHLD, GLOVES, & OVERSHOES IS REQD. OTHER PERSONS ENTERING AREA
FOR ANY REASON MUST BE SIMILARLY PROTECTED. SPRAY APPLICATN SHOULD
BE ISOLATED T O REDUCE POTNTL EXPOS. IN (SUPP DATA)

Respiratory Protection:WHEN APPLYING IN CONFINED AREAS, OR IN OTHER
CIRCUMSTANCES LIKELY TO PRODUCE AIRBORNE LEVELS OF SOLV OR
ISOYCANATE IN EXCESS OF PEL, USE AN NIOSH/MSHA APPROVED
AIR-SUPPLIED RESPIRATOR.
Ventilation:GEN VENT TO MAINTAIN VAP BELOW PEL.
Protective Gloves:SOLVENT RESISTANT GLOVES.
Eye Protection:CHEM WORK GOG OR FULL LNGTH FSHLD.
Other Protective Equipment:PROTECTIVE SUIT INCL HEAD COVERING AND
OVERSHOES IS REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
OTHER PREC:OPEN AREAS, @ LEAST 100 FT SHOULD SEPARATE THIS OPERATION
FROM ANY PERSONS NOT PROTECTED. INSIDE SPRAY APPLICATN SHOULD BE IN
AN AREA SEPARATED FROM OTHER WORK AREAS BY WALLS & VENTED BY LO C
VENT, PROPERLY DESIGNED & OPERATED I/A/W ACGIH GUIDELINES AS
CONTAINED IN ITS INDUS VENT PUBLICATION OR OTHER (ING 7)

HCC:F4
Vapor Density:3.94(ING1)
Spec Gravity:0.96
Evaporation Rate & Reference:0.4(ING 1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR VISCOUS LIQUID.

Stability Indicator/Materials to Avoid:YES
WATER, ALCOHOLS, STRONG BASES, AMINES. STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:OXIDES OF CARBON.

Waste Disposal Methods:EPA WASTE NO. D-001. DISPOSE OF SPILLAGE IN
COMPLIANCE WITH FEDERAL, LOCAL AND STATE REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.